Slurry pump _ Clean water pump _ Vertical sand pumping pump-Hebei Mingrui Water Pump Manufacturing Co., Ltd

Company News

Pipeline pump pump common faults - high energy consumption: Pipeline pump pump is a more common pump, which has been applied in many industries, the scope of application is very wide, and in the process of its operation, sometimes there will be some large or small failures, such as high energy consumption, this phenomenon is a more common failure of the pump, so you need to understand the cause of the phenomenon and the corresponding solution.

How should the liquid and dirt of the cleaning pipeline pump be treated

Keep a detailed record of the cleaning and treatment process, including the cleaning agent used, the type and amount of disinfectant, the amount of liquid discharged and the treatment method, the amount of dirt collected and the treatment method. These records facilitate subsequent traceability and management.

See more | 2024-05-30

Causes and solutions of submersible sewage pump without water

Submersible sewage pump power supply voltage is too low because the power supply voltage is too low, resulting in the submersible sewage pump can not start, the submersible sewage pump is usually required to 380V power supply voltage, should be adjusted to more than 342V. When the submersible sewage pump is used in the emergency situation of flood prevention and drainage, and the power supply voltage is lower than 342V.

See more | 2024-05-30

What is the principle of horizontal slurry pump

Horizontal slurry pump is a single stage, single suction cantilever type centrifugal pump, mainly composed of pump body, impeller, pump cover, bearing body, bracket and other parts. The import and export are on the same horizontal axis, the pump body is horizontally open, and the import and export pipes do not need to be removed during maintenance, and the maintenance is convenient.

See more | 2024-05-30