How to treat wastewater with submersible sewage pump efficiency?

A submersible sewage pump is a device used to treat wastewater by efficiently discharging it to a sewage treatment plant or other designated location. Submersible sewage pumps are widely used in various industrial fields and cities, which can treat and discharge wastewater and reduce pollution to the environment. The following describes how to treat wastewater efficiently using submersible sewage pumps.

First, before using submersible sewage pumps to treat wastewater, equipment needs to be inspected and maintained. Check whether the power line of the sewage pump is intact and whether the motor is running normally. At the same time, check whether the cables and sealing parts of the device are damaged. If the equipment is damaged or faulty, it should be repaired or replaced in time to ensure the normal operation of the equipment.

Next, it is necessary to choose a suitable submersible sewage pump to treat the wastewater. According to the nature of wastewater and treatment requirements, choose the appropriate sewage pump model and specification. Different sewage pumps are suitable for different flow and head, so it is very important to choose the right sewage pump. In addition, it is also necessary to select according to the characteristics of the wastewater such as temperature, PH value and particulate matter content.

Then, place the sewage pump in the wastewater tank or sewage well to ensure that the sewage pump is in full contact with the wastewater. Waste water tanks or Wells should be cleaned and disinfected prior to operation to prevent pipe clogging and bacterial growth. At the same time, it is also necessary to ensure that the inlet and outlet of the sewage pump are connected to the pipeline to avoid leakage and pollution.

Before using the submersible sewage pump, it is necessary to connect the sewage pump to the power supply and set the appropriate working parameters. According to the characteristics of the wastewater and treatment requirements, adjust the flow and head of the sewage pump to ensure that the wastewater can be treated and discharged efficiently. At the same time, it is also necessary to set the operation time and interval time of the sewage pump in order to achieve automatic sewage and recycling.

When the sewage pump starts to work, it is necessary to observe the operation of the equipment in time. If it is found that the sewage pump is not operating normally or there is abnormal noise, it should be stopped immediately for inspection. At the same time, it is also necessary to regularly clean and maintain the sewage pump to prevent blockage and damage. When cleaning and maintaining the sewage pump, be sure to disconnect the power supply and follow the relevant operating procedures.

After the sewage pump is used, it should be shut down and cut off the power supply. Before the shutdown, the waste water in the waste water tank or waste water well should be discharged to avoid water accumulation and odor. At the same time, sewage pumps and pipes need to be cleaned and disinfected to ensure the health of the equipment.