How should the liquid and dirt of the cleaning pipeline pump be treated

After cleaning the pipeline pump, the treatment of liquid and dirt needs to follow certain steps and principles. Here's a clear guide:

First, liquid treatment

Preparation before discharge:

Before draining the liquid, make sure all power is turned off to prevent accidental start-up.

Check whether the discharge pipe is smooth and avoid blockage.

Emissions:

Use appropriate discharge methods, such as draining the liquid through a drain line.

When discharging, attention should be paid to the flow direction and speed of the liquid to avoid sputtering or leaking.

Process:

Choose the appropriate treatment method according to the nature of the liquid (such as cleaning agent, disinfectant, etc.).

Hazardous or toxic liquids should be handled in strict accordance with the relevant regulations and may need to contact the waste disposal company.

For ordinary cleaning water, you can choose to discharge directly or discharge after simple purification treatment according to the actual situation.

Second, dirt treatment

Collect:

Use a vacuum cleaner or other appropriate tool to collect dirt from the pipe pump.

Ensure that there is no secondary pollution or damage to the environment during the collection process.

Categories:

According to the nature and composition of the dirt classification, such as metal scraps, non-metallic residue, etc.

Sorting facilitates subsequent disposal and recycling.

Process:

For recyclable dirt, such as metal shavings, you can contact the waste recycling station for recycling.

Harmful dirt, such as residue containing harmful substances, should be treated in strict accordance with the relevant regulations and may need to contact the waste treatment company.

For general non-metallic residue, you can choose landfill or incineration and other treatment methods.

Third, precautions

Wear appropriate protective equipment such as gloves and goggles when handling liquids and dirt.

Avoid direct contact with harmful or toxic substances.

Strictly comply with relevant regulations and standards to ensure that the processing process meets the requirements.

Minimize waste generation and discharge, and improve resource utilization.

Records:

Keep a detailed record of the cleaning and treatment process, including the cleaning agent used, the type and amount of disinfectant, the amount of liquid discharged and the treatment method, the amount of dirt collected and the treatment method.

These records facilitate subsequent traceability and management.

To sum up, the liquid and dirt treatment after cleaning the pipeline pump needs to follow certain steps and principles, through the correct treatment and recording, you can reduce the impact on the environment and improve resource utilization.